Method Of Extension Of Stainless Steel Laser Cutting Machine

How to Extend The Service Life Of The Laser Cutting Machine?

A variety of problems may occur after a period of time, and the extension of life span is one of them. Metal laser cutting machines need to make more efforts in extending their life. Purchasing machines with long service life at the same price are our common pursuit. Everyone wants to make the metal laser cutting machine longer, but the metal laser cutting machine needs our daily maintenance. Let's take a look at the life extension method of metal laser cutting machine.

Method of extension of stainless steel laser cutting machine 1:

Water replacement and water tank cleaning: It is recommended to clean the water tank once a week to replace the circulating water once. It should be noted that the laser tube needs to be full of circulating water before the machine work. The water quality and water temperature of circulating water will directly affect the life of the laser tube. It is recommended that users use pure water and control the water temperature below 35 °C. If you exceed 35 °C, you need to replace the circulating water, or add ice cooling to the water (it is recommended to use a cooler or two water tanks).

Cleaning water tank: First turn off the power, pull out the water inlet pipe, let the water in the laser pipe automatically flow into the water tank, open the water tank, remove the water pump, remove the dirt on the pump. Wash the water tank, replace the circulating water, restore the pump back to the water tank, insert the water pipe connected to the pump into the water inlet, and organize the joints. Electric power alone and run for 2-3 minutes (the laser tube is full of circulatory water).

How to extend the life of stainless steel laser cutting machine 2:

Fan cleaning: Due to the long period of use, a large amount of solid dust can be accumulated in the fan, causing the fan to have a big noise, which is not conducive to exhaust and deodorization. When the fan is poor or the smoke is poor, the power is turned off first, the entrance and exit tube on the fan are removed, the dust is removed, and the fan is inverted, the wind leaves are pulled out until the wind is cleaned, and then the fan is installed.

Method of extension of stainless steel laser cutting machine 3:

The guide rail cleaning (recommended to clean it once a month, close the operation) guide rail, and the straight axis as one of the core components of the device is to play a guidance and supporting role. In order to ensure that the machine has high processing accuracy, the straight axis requires high guidance accuracy and good motion stability. During the operation of the equipment, due to the workpiece during processing, a large amount of corrosive dust and smoke will be generated. These smoke accumulation on the rail and straight axis surface has a great impact on the processing accuracy of the equipment. Formation of corrosion points and shorten the service life of the device. In order to make the machine work normally and stable and ensure the quality of the product's processing, we should take the daily maintenance of the guide rail and straight axis.