How To Do Laser Cutting Machine Moisture-proof Work

In southern China, cold air leaves in March each year. Although the temperature rose in April, the Qingming Festival and Gu Yu were in the rain. Coupled with the rainy season in May and June, it can be said that the whole half of the first half was humid. The increase in temperature leads to an increase in air humidity. The wall and floor tiles can even see water droplets, which are wet everywhere. In northern China, most areas in July and August have entered the flood season, and the increase in rainwater increased air humidity.

Under this climatic conditions, if the moisture protection of laser cutting equipment is ignored, it may cause problems such as black screens of computer computers, industrial controllers that cannot be started, laser alarm, and switching. Therefore, the moisture protection protection of the laser cutting machine is also the escort of the normal operation of the laser cutting machine.

Activated carbon prevention and dehumidification

Activated carbon has many uses. It can not only dehumidify, but also purify the air and remove the odor. The dehumidification box sold by supermarkets is mainly composed of fluoride and activated carbon. This is a very good dehumidification product, but this dehumidification method is only applicable to small spaces. For example, it can effectively absorb moisture and effectively remove odors in the cutting machine control cabinet and electrical cabinet. Using activated carbon -proof in humid weather can reduce the environmental humidity of the control cabinet and electrical cabinet, and reduce the probability of faults due to humidity.

On a sunny day, open the window to breathable.

When it is raining or cloudy outside, do not open the windows (especially the windows facing south) to prevent the damp and humid air flow from entering the house. When the weather is good, selectively (open windows in other directions) open the windows to ventilate to reduce the indoor humidity.

Dehumidifying lime

Data show that every 1 kg of lime can absorb about 0.3 kg of water in the air. Lime lime can absorb water well. If the room is humid and the ground is condensed, lime can also be placed in every corner of the workshop to achieve the effect of rapid dehination and dryness.

Air -conditioning dehumidification

In humid weather, the dehumidification effect of air conditioners is also very obvious. Open the air conditioner, adjust the dehumidification function option, and then run the air conditioner normally. The air conditioner is equivalent to the dryer, which can reduce the humidity of the indoor environment and effectively ensure that the indoor air humidity is not too large, which is very conducive to the stable operation of the equipment.

Clean the dust in the electrical cabinet regularly to achieve the purpose of dust removal.

Dust, dust itself can easily absorb water and gas in the air. Regular dust removal to the electrical cabinet can effectively reduce the environmental humidity of the cabinet

There are water vapor outside the electric cabinet, don't start immediately.

If there is water vapor outside the electric cabinet, you should dry the water steam on the surface of the electric cabinet first, turn on the air conditioner (open the dehumidification function) for half an hour, and then turn on the equipment power supply to observe to ensure the stable operation of the equipment.

Periodic inspection

Check the drainage of the air compressor, filter element, cold dryer and other components. Avoid the risk of cutting head lenses and machine tool air road pipeline pollution.

For humid weather, please pay special attention to anti -static lightning protection. Staff must not wear slippers, you must check whether the ground line is grounded frequently